POSIX ACLs を利用して共有を設定する

提供：雑廉堂Wiki
2019年3月1日 (金) 19:01時点におけるMeisina04 (トーク | 投稿記録)による版 (→‎はじめに)

はじめに

SambaはPOSIXアクセス制御リスト（ACL）との共有をサポートしています。 それらを使用すると、UNIXユーティリティを使用してSambaホスト上でローカルに権限を管理できます。 共有のファイルシステムが拡張属性をサポートしている場合は、WindowsのACLと同様に、拡張POSIX ACLを使用して複数のユーザーおよびグループをACLに設定できます。 詳細は拡張ACLの設定をご覧ください。 細かいWindows ACLが必要な場合は、代わりにWindows ACLを使用して共有を設定してください。 詳細については、 Windows ACLを使用した共有の設定を参照してください。

Sambaは、以下のPOSIX ACLとの共有をサポートしています。

  • ドメインメンバー
  • NT4 PDCとBDC
  • スタンドアロンホスト

{{#invoke:Message box|imbox}}

ホストの準備

共有を作成する前に、Sambaをセットアップしてください。 詳しくは、以下を参照してください。



Making Files Executable

Using the default setting, users are only able to execute files, such as *.exe and *.bat, on a Samba share if they have the POSIX x-bit set. For example, the following file is executable for the root user and members of the Domain Users group: 

-rwxr-x--- 1 root "Domain Users" 133160 1. Jan 00:00 /srv/samba/Demo/example.exe

In some scenarios it is necessary to enable users to execute all files on a share, regardless if the x-bit is set. To enable, set in the [global] section of your smb.conf: 

acl allow execute always = yes



Adding a Share

To share the /srv/samba/Demo/ directory using the Demo share name:

  • Create the directory:
# mkdir -p /srv/samba/Demo/
  • Add the [Demo] share definition to your smb.conf file:
[Demo]
       path = /srv/samba/Demo/
       read only = no
These are the minimum parameters required to set up a writeable share. Optionally, you can set share permissions. For details, see Setting Share Permissions.
  • Reload the Samba configuration:
# smbcontrol all reload-config



Setting ACLs

Setting Standard UNIX ACLs

The standard access control lists (ACL) on a UNIX operating system supports setting permissions for one owner, one group, and everyone else (other). If you need to set multiple ACLs on a directory, see Setting Extended ACLs.

For example, to set the owner of the /srv/samba/Demo/ directory to root, grant read and write permissions to the owner and the Domain Users group, and deny access to all other users, enter: 

# chmod 2770 /srv/samba/Demo/
# chown root:"Domain Users" /srv/samba/Demo/

{{#invoke:Message box|imbox}}

For further details about the permissions, see the chmod(1) and chown(1) man page.


Setting Extended ACLs

If your file system supports extended access control lists (ACL), you can use extended POSIX ACLs. They enable you to set permissions for multiple users and groups on a file or directory - similar to Windows ACLs. However, POSIX ACLs are limited to the following general permissions modes:

  • None
  • Read
  • Write
  • Full control

For example, to set read, write, and execute permissions for the Domain Admins group, read and execute permissions for the Domain Users group, and deny access to everyone else on the /srv/samba/Demo/ directory:

  • Add the inherit acls = yes parameter to the share's configuration. For example:
[Demo]
       path = /srv/samba/Demo/
       read only = no
       inherit acls = yes
The inherit acls = yes parameter enables ACL inheritance of extended ACLs. For further details, see the parameter description in the smb.conf man page.
  • Reload Samba:
# smbcontrol all reload-config
  • Verify that the directory is stored on a file system that supports extended ACLs. For details, see File System Support.
  • Disable auto-granting permissions for the primary group of user accounts:
# setfacl -m group::--- /srv/samba/Demo/
# setfacl -m default:group::--- /srv/samba/Demo/
The primary group of the directory is additionally mapped to the dynamical CREATOR GROUP principal. If you use extended POSIX ACLs on a Samba share, this principal is automatically added and you cannot remove it. For further details about the CREATOR GROUP principal, see Well-known security identifiers in Windows operating systems.
  • Set the permissions on the directory:
  • Grant read, write, and execute permissions to the Domain Admins group:
# setfacl -m group:"SAMDOM\Domain Admins":rwx /srv/samba/Demo/
  • Grant read and execute permissions to the Domain Users group:
# setfacl -m group:"SAMDOM\Domain Users":r-x /srv/samba/Demo/
  • Set permissions for the other ACL entry to deny access to users that do not match other ACL entries:
# setfacl -R -m other::--- /srv/samba/Demo/
These settings are only applied to the directory itself. In Windows, this is converted to This folder only.
  • To configure that the same permissions set in the previous step are inherited to new file system objects created in this directory, enter:
# setfacl -m default:group:"SAMDOM\Domain Admins":rwx /srv/samba/Demo/
# setfacl -m default:group:"SAMDOM\Domain Users":r-x /srv/samba/Demo/
# setfacl -m default:other::--- /srv/samba/Demo/
With this settings, the This folder only mode for the principals now changed to This folder, subfolders, and files.

The ACLs set in the previous steps are mapped to the following Windows ACLs:

Principal Access Applies to Comments
SAMDOM\Domain Admins Full control This folder, subfolders, and files
SAMDOM\Domain Users Read & execute This folder, subfolders, and files
Everyone None This folder, subfolders, and files Samba maps the permissions for this principal from the UNIX other ACL entry.
directory_owner (Unix User\directory_owner) * Full control This folder only Samba maps the owner of the directory to this entry.
directory_primary_group (Unix User\directory_primary_group) * None This folder only Samba maps the primary group of the directory to this entry.
CREATOR OWNER * Full control Subfolders and files only On new file system objects, the creator inherits automatically the permissions of this principal.
CREATOR GROUP * None Subfolders and files only On new file system objects, the creator's primary group inherits automatically the permissions of this principal.

* Configuring or removing these principals from the ACLs is only supported when using Windows ACLs. For details, see Setting up a Share Using Windows ACLs.

For further details, see the setfacl man page.



Setting Share Permissions

Optional: Samba enables you to set permissions on each share which are validated when a user connects.

Access to the content on a share, is controlled using file system access control lists (ACL). For details, see Setting POSIX ACLs on a Samba Share


Configuring User and Group-based Share Access

Share-based access control enables you to grant or deny access to a share for certain users and groups. For example, to enable all members of the Domain Users group to access a share while access is denied for the example_user account, add the following parameters to the share's configuration: 

       valid users = +SAMDOM\"Domain Users"
       invalid users = SAMDOM\example_user

The invalid users parameter has a higher priority than the valid users parameter. For example, if the example_user account is a member of the Domain Users group, access is denied for this account in the previous example.

For further details, see the parameter descriptions in the smb.conf(5) man page.


Configuring Host-based Share Access

Host-based access control enables you to grant or deny access to a share based on host names, IP addresses, or IP ranges. For example, to enable the 127.0.0.1 IP address, the 10.99.0.0/24 IP range, and the GoodHost host name to access a share, and additionally deny access for the BadHost host name, add the following parameters to the share's configuration: 

       hosts allow = 127.0.0.1 10.99.0.0/24 GoodHost
       hosts deny = BadHost

The hosts deny parameter has a higher priority than the hosts allow parameter. For example, if BadHost resolves to an IP address that is listed in the hosts allow parameter, access to this host is denied.

For further details, see the parameter descriptions in the smb.conf(5) man page.



「http://www.rough-and-cheap.jp/mediawiki/index.php?title=POSIX_ACLs_を利用して共有を設定する&oldid=9904」から取得